Sauna Heater Controls - Heavy Duty 9 - 18kw

The Oceanic heavy duty control system comprises 3 modules;
A temperature sensor for thermostatic control and thermal overload protection

A control box housing the switching units.

A keypad to enable temperature and time settings that also has a switch for the cabin light; the starting time can be preset up to 12 hours in advance.

The keypad requires only low voltage lightweight wiring so can be located on the sauna cabin, in the plant room or at another location to provide facility management.

Digital controls are more accurate and more reliable than conventional controls they are particularly suitable for commercial use - allowing the operator to maintain control over the sauna temperature and prevent tampering. A series of LEDs show each function of the heater and allow for quick and simple fault diagnosis in the event of a problem occuring.
Sequential heating - to begin with all of the elements switch on for rapid heating, as the required temperature is approached the elements switch off sequentially until just one element is left on in order to maintain the cabin temperature steady within a narrow band - helping to improve user comfort and extend the life of the elements.

A door interlock facility is provided to prevent the sauna cabin from switching on if the door is open - a CE requirement for operation of unattended cabins in apartment blocks etc.

Mainland England and Wales:
Delivery Charges : £40